LINK RCA Connector

The new LINK RCA Connector is based upon the famous Bullet from ETI-Research with added benefits. The Signal Pin is now made from Pure Copper for even better conductivity while the Return Pin is still made from Tellurium Copper.

ETI-Research Link RCASince the Return Pin is a very Low Mass Hollow design to make it from Harden Copper would not give the strength or the durability needed for soldering and everyday use. The benefits of the hollow design are far more conducive to the sound quality than if we just made a simple solid pin instead like so many of the copies on the market today.

The Housing is now made from Aluminium. When we first started making the original Bullet we did not have to worry about all the EMI radiation that is floating around our Audio Systems. But toady with all the processors and switching power supplies that are used our Audio Systems are in a bath of noise.

So we have changed over to Aluminium as it has very good EMI/RF noise rejection so to keep your signal as clean as it possibly can be.

The LINK RCA now has twin strain relief screws to keep your cable and the connection away from all the plugging  and pulling stress.