Nexus RCA Connector

The ETI-Research Nexus RCA Connector has taken a new direction for us. While we are the originators of the minimum mass star grounding philosophy, we believe that we can make a more conventional RCA Connectors that can offer many of the same attributes as the Bullet that so many have come to depend on for absolute sound quality.

In theory a RCA Connector should allow the signal to transmit with little interference or effect. However so many RCA Connectors are made from poor conductive metals such as Brass which can alter the signal in a way to cause a brittle and harsh sound.

The Nexus RCA Connector changes that with the use of 1100 series Copper for the Signal Pin Copper which has a IAC Rating of 102%.

To ensure the durability needed for plugging in and out the Body is made from Tellurium Copper. This makes sure that integrity of the plug is maintained for years and years.

The Nexus RCA has been changed to allow not only the signal wire to be screwed but also now the return wire. So  to change the brass connector over from your interconnect is as easy as cutting off the old connector and stripping the dielectric back and then tighten to the Nexus RCA.

Please do not over tighten as this may cause the screw head to snap off as light pressure is all that is needed.

  • Signal Pin Pure 1100 series Copper
  • Screws for bothe the signal and return wires
  • Tellurium Copper Body
  • Silver Plated with no nickel
  • Twin Cable Strain Relief
  • Aluminum Housing for EMI/RF rejection
error: Content is protected please contact us for info